The current version of EGL in Mesa implements EGL 1.4. More information about EGL can be found at http://www.khronos.org/egl/.
The Mesa’s implementation of EGL uses a driver architecture. The main
libEGL) is window system neutral. It provides the EGL API
entry points and helper functions for use by the drivers. Drivers are
dynamically loaded by the main library and most of the EGL API calls are
directly dispatched to the drivers.
The driver in use decides the window system to support.
configurewith the desired client APIs and enable the driver for your hardware. For example
$ ./configure --enable-gles1 --enable-gles2 \ --with-dri-drivers=... \ --with-gallium-drivers=...
The main library and OpenGL is enabled by default. The first two options above enables OpenGL ES 1.x and 2.x. The last two options enables the listed classic and and Gallium drivers respectively.
Build and install Mesa as usual.
In the given example, it will build and install
libGLESv2, and one or more EGL drivers.
There are several options that control the build of EGL at configuration time
- By default, EGL is enabled. When disabled, the main library and the drivers will not be built.
- The directory EGL drivers should be installed to. If not specified,
EGL drivers will be installed to
List the platforms (window systems) to support. Its argument is a comma separated string such as
--with-egl-platforms=x11,drm. It decides the platforms a driver may support. The first listed platform is also used by the main library to decide the native platform: the platform the EGL native types such as
The available platforms are
androidplatform can either be built as a system component, part of AOSP, using
Android.mkfiles, or cross-compiled using appropriate
haikuplatform can only be built with SCons. Unless for special needs, the build system should select the right platforms automatically.
These options enable OpenGL ES support in OpenGL. The result is one big internal library that supports multiple APIs.
- By default,
libGLhas its own copy of
libglapi. This options makes
libGLuse the shared
libglapi. This is required if applications mix OpenGL and OpenGL ES.
There are demos for the client APIs supported by EGL. They can be found in mesa/demos repository.
There are several environment variables that control the behavior of EGL at runtime
By default, the main library will look for drivers in the directory where the drivers are installed to. This variable specifies a list of colon-separated directories where the main library will look for drivers, in addition to the default directory. This variable is ignored for setuid/setgid binaries.
This variable is usually set to test an uninstalled build. For example, one may set
$ export LD_LIBRARY_PATH=$mesa/lib $ export EGL_DRIVERS_PATH=$mesa/lib/egl
to test a build without installation
- This variable specifies a full path to or the name of an EGL driver. It forces the specified EGL driver to be loaded. It comes in handy when one wants to test a specific driver. This variable is ignored for setuid/setgid binaries.
This variable specifies the native platform. The valid values are the same as those for
--with-egl-platforms. When the variable is not set, the main library uses the first platform listed in
--with-egl-platformsas the native platform.
EGL_MESA_drm_displaydefine new functions to create displays for non-native platforms. These extensions are usually used by applications that support non-native platforms. Setting this variable is probably required only for some of the demos found in mesa/demo repository.
- This changes the log level of the main library and the drivers. The
valid values are:
This driver supports both
drm platforms. It functions as
a DRI driver loader. For
x11 support, it talks to the X server
directly using (XCB-)DRI2 protocol.
This driver can share DRI drivers with
The ABI between the main library and its drivers are not stable. Nor is there a plan to stabilize it at the moment.
The sources of the main library and drivers can be found at
Lifetime of Display Resources
Contexts and surfaces are examples of display resources. They might live longer than the display that creates them.
In EGL, when a display is terminated through
display resources should be destroyed. Similarly, when a thread is
eglReleaseThread, all current display resources
should be released. Another way to destroy or release resources is
through functions such as
When a resource that is current to some thread is destroyed, the
resource should not be destroyed immediately. EGL requires the resource
to live until it is no longer current. A driver usually calls
eglIs<Resource>Bound to check if a resource is bound (current) to
any thread in the destroy callbacks. If it is still bound, the resource
is not destroyed.
The main library will mark destroyed current resources as unlinked. In a
eglIs<Resource>Linked can then be
called to check if a newly released resource is linked to a display. If
it is not, the last reference to the resource is removed and the driver
should destroy the resource. But it should be careful here because
MakeCurrent might be called with an uninitialized display.
This is the only mechanism provided by the main library to help manage the resources. The drivers are responsible to the correct behavior as defined by EGL.
In EGL, the color buffer a context should try to render to is decided by
the binding surface. It should try to render to the front buffer if the
binding surface has
EGL_RENDER_BUFFER set to
If the same context is later bound to a surface with
EGL_RENDER_BUFFER set to
EGL_BACK_BUFFER, the context should try
to render to the back buffer. However, the context is allowed to make
the final decision as to which color buffer it wants to or is able to
For pbuffer surfaces, the render buffer is always
And for pixmap surfaces, the render buffer is always
EGL_SINGLE_BUFFER. Unlike window surfaces, EGL spec requires their
EGL_RENDER_BUFFER values to be honored. As a result, a driver should
EGL_PBUFFER_BIT bits of a config if
the contexts created with the config won’t be able to honor the
EGL_RENDER_BUFFER of pixmap or pbuffer surfaces.
It should also be noted that pixmap and pbuffer surfaces are assumed to
be single-buffered, in that
eglSwapBuffers has no effect on them. It
is desirable that a driver allocates a private color buffer for each
pbuffer surface created. If the window system the driver supports has
native pbuffers, or if the native pixmaps have more than one color
buffers, the driver should carefully attach the native color buffers to
the EGL surfaces, re-route them if required.
There is no defined behavior as to, for example, how
EGL_RENDER_BUFFER. Right now, it is desired that the
draw buffer in a client API be fixed for pixmap and pbuffer surfaces.
Therefore, the driver is responsible to guarantee that the client API
renders to the specified render buffer for pixmap and pbuffer surfaces.
EGLDisplay will be locked before calling any of the dispatch
functions (well, except for GetProcAddress which does not take an
EGLDisplay). This guarantees that the same dispatch function will
not be called with the sample display at the same time. If a driver has
access to an
EGLDisplay without going through the EGL APIs, the
driver should as well lock the display before using it.